 |
 |
 |
 |
How to clean and lubricate the fittings of a plastic window and when to do it
The spring sun, warming with the warmth of the house, always gradually recalled that it was time to wash the windows. Armed with buckets, newspapers and rags, the keepers of the hearth, sometimes putting their lives in danger, cleaned the glass to shine. Convenient plastic windows replaced the wooden one. But, nevertheless, they require regular attention and care. In spring and autumn, it is necessary to wash the plastic windows, the accessories must be inspected, cleaned, if necessary, replaced.
Content
- Brilliance and purity
- Check and tidy window mechanisms
- Protect window seals
- How to adjust the plastic window fittings video
Brilliance and purity
Routine inspection and cleaning of window hardware is a must. It takes a little time, but significantly prolongs life plastic windows and, accordingly, all fittings. First, we have to remove the accumulated dust and dirt from the windows. To do this, we arm ourselves with a soft napkin and special detergents (all this is sold in any supermarket or in a hardware store). Do not use solvents or alkalis; they will simply damage the plastic. Gently wipe the frame, window sill, handles and wash the glass. After our windows shone, we proceed to the next procedure.
Check and tidy window mechanisms
The window mechanism will always come to the rescue if you need to open or close the window. But he also needs help, so that he continues to work properly. Dust and small debris simply love to cram into the slots of the mechanism and prevent it from fulfilling its important mission. So, first of all, we remove all unnecessary. To do this, arm yourself with a small brush with a long handle or a regular toothbrush that has served its purpose. Gently clean the mechanism, then wipe it with a damp cloth. The next step is to protect the mechanism from wear with a special grease for plastic windows. It is sold in stores or from window manufacturers. If the mechanism is located in an inconvenient place, fill it with grease using a conventional syringe. Please note that grease should evenly cover all moving parts of the mechanism.
Protect window seals
Sealers are an important part of windows. They are the ones who guard the warmth and comfort of our home. They do not let in draft and do not let out precious heat. Agree that gaskets deserve attention at least once a year. The material from which the seals for plastic windows are made is exposed to condensation and drying out. Condensation is easy to deal with. You just have to open windows sometimes. And for the prevention of drying out (and this leads to the appearance of undesirable microcracks and, as a consequence, to a violation of the tightness of the seal), you need to wipe the surface of the seal with silicone grease a couple of times a year (you can buy a convenient pencil) or ordinary pharmacy glycerin.
How to adjust the plastic window fittings
How to adjust the fittings of a plastic window. If the windows do not close well or fasten, then you need to carefully check all the fittings. The microclimate and home safety depend on the serviceability of the windows. Specialists involved in the production and installation are well aware of how to adjust the fittings of a plastic window and, if possible, it would be better to turn to them. But a small problem can be fixed with your own hands. It is better to check the operability and adjust the windows in the fall, before the onset of cold weather.
Adjustment of fittings is not the most difficult thing. For example, in order to return a loose handle to the system, you need to carefully push the patch panel and tighten the mounting screws properly. If the window handle is jammed, turn it 90 degrees and tighten the two screws. Attention, if a suspicious crunch is heard when turning the handle, it is better to replace it. After tightening the bolts, the panel must be carefully returned to its place. For prevention, it would be good to check all the fasteners. If the flaps sagged, they can be adjusted using a special key. Remove the decorative trim from the hinge, insert the key into the slot and rotate the key, adjusting the sash.
Please note that the procedure for adjusting the plastic window depends on the brand and the manufacturer. Let's say you have installed plastic window fittings roto. To effectively fix the problem and not to spoil the window, it is better to look at the manufacturer’s website, there is a list of typical problems and malfunctions. Or call a specialist store and consult with specialists. A small breakdown or malfunction can be eliminated with your own hands, but if it did not work out better, call the wizard.
In case of wear of parts, it is necessary to timely replace the accessories of plastic windows. If tears were noticed on the seal during inspection, the color changed or drafts appeared during operation, it means that it worked out its own and it was time to replace this part. A cracked handle or decorative trim is also best replaced with a new one. Necessary spare parts can be purchased from the manufacturer of plastic windows.
Take a little time a couple of times a year to your windows. Adjusting the fittings on plastic windows, lubricating window mechanisms and cleaning them from contamination is not a difficult job, and as a result, your windows will serve you faithfully for a long time to come.
