DIY air humidifier
Thirty-five-degree heat on the street in the summer insistently makes you think about humidification in the room. But the climate technology for the home is quite an expensive pleasure. So maybe make an air humidifier yourself?
Content
- Humidification: Options Available
- The main components of an air humidifier video
- What should we build a humidifier video video
The best option for humidification and air conditioning, of course, is the acquisition of climate technology. But modern climate technology is quite expensive, so homemade humidifiers that work on the principle of cold steam can serve as an alternative.
In order to lower or bring down the degree, glass jars, plastic bottles, computer coolers, gauze, rags, clothespins and fiber are used. The discouraging Kulibins cleverly and skillfully apply for these purposes waste baskets, diffrele covers and other trifles lying around somewhere outside the city. Meet super models or how to make a humidifier with your own hands.
Humidification: Options Available
The most proletarian antiquated way to humidify indoor air is an ordinary can with cold water and a rag lowered into the can. Scheme: water evaporates; air becomes moist; it works for centuries without fail in people's understanding. One bad thing is that a liter of water in a jar will slowly evaporate over the course of a month, drop by drop. The sibling of a can of water for humidification is a wet towel that dries on a rope and creates a moisturizing effect.
The air humidification performance in this way is zero, so humanity has rapidly advanced in its development of air humidifiers.
The main components of an air humidifier
A home-made humidifier, like any other device, has components.
The design of the humidifier is primitive and consists of:
water tanks of any volume
container cover
integrated cooler with a diameter up to 140 mm
voltage regulator for cooler
fabric filters.
In the primitive design of a humidifier with their own hands, the bottle was always considered the first-born and obligatory reservoir for water in a do-it-yourself bottle. It doesn’t matter how much: 0.5 or 0.7, or maybe a parsley. The main thing is that the bottle is an excellent reservoir for supplying water, especially inverted.
Cost: a plastic water bottle, nozzle and spray, as well as a compact humidifier.
Watch the proposed video and see for yourself.
What should we build a humidifier
Building a humidifier is not a problem at all. The main thing would be to collect it from. In most cases, homemade products have a bulky and awkward appearance and work noisily, but this does not interfere with humidifying indoor air up to 70%.
A self-made humidifier with a stunning and impressive aerodynamic design. The action is based on the application of the mechanical principle air wash.
Humidification occurs due to self-moistening discs. The disks are constantly in a wettable condition because they pass through a container of water. The surface of the two discs is located above the water, allowing for gentle air humidification. The humidification principle is self-regulating, therefore the performance of the humidifier depends on the ambient temperature and humidity level.
The work uses 2 disks with a total area of \u200b\u200babout 3 sq.m. The open wet area is 1.7 sq.m. The felt humidity at a temperature of 24 ° C reaches 60% after half an hour.
Evaporation rate is:
- with a single inclusion of 1 liter per hour
- with a significant operating time of up to 0.4 liters per hour
- air flow reaches 180 m3 per hour.
Almost brand BALLU AW-312 humidifier.
Cost part: plastic box, fan and motor with rotary gear.
The next option for a do-it-yourself air humidifier is a design consisting of a plastic container with cold water, a closed lid and an integrated computer fan.
Principle of operation cold steam: through mechanical vibrations, water droplets are converted into microscopic water vapor, the dry air from the room is sucked in, passes through the water vapor, saturated with water ions and then distributed throughout the room. Almost like a Boneco 7136 ultrasonic humidifier, but much cheaper. Fresh, bold and affordable! True, the increase in air humidity is insignificant and amounts to only 50-70%, and the fabric filter will have to be washed regularly with running water.
Cost part: rectangular plastic container for water, cooler, fabric filter.
Impressive, isn't it?
A simple room humidifier made of a large plastic basket, a water tank and a fan built into the lid for the tank. Fabric filters allow 2.5 liters of water to evaporate per day.
Expenditures: a large-sized tank for a water tank, a fan built into the lid, a voltage regulator, fabric filters.
All the proposed models of homemade air humidifiers are connected to the network through a standard power supply. The voltage is adjustable, so you can always adjust the performance of the unit in the daytime or at night.
An affordable and win-win option for humidification is the purchase of a fountain and a decorative desktop or wall pond.
To create table or floor indoor fountains that perfectly moisturize the air in the room of a private house, you can use exotic techniques and attractive decorative elements. Such fountains will captivate with their natural beauty of living water flowing or dripping over pebbles and a leaf. A clean and saturated aura of water will give you vigor and energy.
