Garden paths made of wood, how to properly lay, how to properly prepare blanks for laying
An original and unusual garden path is quite possible to make without a lot of money and buying special materials. Moreover, it will be a completely unique decoration of the garden, which no one else has. To design a garden path, you will need ordinary saw cuts of various types of wood, selected in size, texture and texture.
Content
- Choosing a tree species for garden paths
- Garden Path from Oaks video
- Garden Path Blanks
- Preparing a trench for a garden path
- Making a garden path made of wood cuts
- So you can decorate the garden path and you video
Choosing a tree species for garden paths
In order to lay garden paths made of wood, it is best to use wood with a high density and resistant to decay. There are not so many such species of wood, so the list will be very small.
Larch is an ideal option for arranging paths in the garden. In addition to the fact that this tree does not decay for a long time under the influence of dampness and moisture, there is one more reason to use it.
Beautiful texture: the larch on the cut has pronounced annual rings that form a bizarre pattern. Depending on the place of growth and the temperature regime of the growth area, the color of the rings varies from light yellow to brown. Moreover, this palette is so interesting and diverse that you can pick up and lay out bright color combinations that will become a real work of art.
Oak is also ideal for laying out a garden path made of wood. The service life of oak slices will be at least 10 years, which is a very good result.
Pine, aspen, poplar and other species can very well be used to create garden paths. Their only drawback is a much shorter service life, which can be extended by soaking the laid down saw cuts with deep penetration primers.
Garden Path Blanks
Having decided on the wood for the device of the tracks, it is necessary to mark and saw the log into blanks. The thickness of the saw must be at least 15cm. Diameters can be taken different, but it is not worth getting carried away too small (up to 20cm), since walking along such a path will be quite inconvenient. It is best to combine large diameters with small ones. Then you get an interesting pattern, and practicality and convenience will not be affected.
After sawing, the workpiece must be soaked with linseed oil or any other antiseptics. This is necessary to extend the life of the wood and to prevent premature decay.
Cover the lower section, which will be laid on the ground, with a layer of bitumen. To do this, it is enough to dip the bottom of the workpiece into the molten bitumen solution and put the saw cut to dry.
For those who do not have plantings on the site, but still plan to lay garden paths made of wood, it is not difficult to buy ready-made blanks. Already prepared, impregnated saw cuts are sold in building materials stores and their selection is very large.
Preparing a trench for a garden path
Sawing after impregnation will dry for 1-2 days. During this time, you need to prepare and dig a trench for laying blanks.
It is necessary to outline the trajectory of the trench in advance. Then decide on its width. In order to make marking more convenient, you can use pegs and a thin rope. Digging should be at a depth of at least 20-25 cm, you can deepen a little more, but then you have to pour a thicker layer of sand cushion.
Waterproofing of the future garden path is simply necessary. To do this, you can lay the bottom of the trench with ordinary polyethylene or buy a special geotextile. After that, sand-gravel mixture should be poured into the recess under the path and carefully packed. To prevent stagnation of moisture between the saw cuts of the tree, a slight slope can be made to drain the water.
Making a garden path made of wood cuts
After preparing the trench and blanks, you can proceed directly to the design and laying of saw cuts.
There are many recommendations and tips for laying down saw cuts. Someone thinks that it is necessary to start laying with large diameters, filling the space between them with small ones. Someone puts everything in a row, using the space completely. The main thing here is to choose the right pattern for you.
Saws are laid in a trench and pressed into the sand. With the help of the level, all irregularities and protrusions are revealed. For alignment, you can use a wooden or rubber mallet, which is tapped on the workpieces, deepening them to the desired height. In the absence of rubber, it is quite possible to take an ordinary hammer with a metal head. It is only necessary to use it as carefully as possible and not to hit the workpieces too hard, in order to avoid deformation and chips of wood round.
After the wood path with your own hands is properly designed and all the saw cuts are laid out, you need to fill the space between the rounds with sand or gravel. Of course, it is better to use gravel, since sand is very easily washed out by rain. If desired, you can arrange borders for the path. For these purposes, you can use both brick and natural stone, and ordinary boards. If there are small tree trunks left after clearing the site, then you can use them only, laying along the paths on the sides.
After arranging the track, do not forget about it. At least once a year, you need to clean the trail of debris and soak the tree with a primer. These manipulations will help extend the life of wooden elements and prevent rotting processes.
The beauty of our garden largely depends on the design of the tracks. Even the lush flowering of hundreds of plants will not hide the carelessness and flaws of the garden design. You should seriously approach the arrangement of paths, especially since you now know exactly how to make a path from wood.
