 |
 |
 |
 |
A hunting belt for a fruit tree - protection from pests, as is done with your own hands, gardener's advice. Ecotrap's hunting belt is a very effective tool.
Having familiarized yourself with the numerous recommendations for amateur gardeners, you can find out that in the summer and autumn periods a thorough pest control is necessary. The most dangerous of these is the apple codling moth, since the harm it does is difficult to underestimate. For this purpose, various agricultural activities are carried out. Among them is the cleaning of the bark from the trees, but the effectiveness of this method is insufficient to use it in an independent version when combating the moth.
Content
- Fishing Belts - The Most Effective Method
- The principle of fukation of hunting belts
- Overlay rules
- Materials required for manufacturing
- Manufacturing technique video
- Professional Tips
- Ecotrap's hunting belt is a very effective tool.
Fishing Belts - The Most Effective Method
In this regard, gardeners came to the conclusion that the most effective method of cleaning fruit trees from the apple moth and mites is the use of hunting belts.
The principle of operation of hunting belts
Hunting belts in their own form do not guarantee the destruction of pests, unless you use self-adhesive belts or belts saturated with pesticides. The use of hunting belts involves the concentration of caterpillars or other pests in a particular place, and there are cases when the number of insects caught has reached more than 600 individuals. Thus, if you plan to get a high harvest, then it's time to think about buying fishing belts or making them yourself.
Overlay rules
Given the above, the use of hunting belts for trees should occur in accordance with certain rules.
impose after flowering
Firstly, the imposition of belts on fruit trees is carried out at the end of 2-3 weeks after flowering, when there is still a margin of time before the start of the mass season of moths.
the role of clearing trees from bark
Secondly, it is necessary to mention again the proven method of gardeners, which consists in cleaning the trees from dead bark. This procedure is carried out on the lower part of the stem 25 cm above the soil level.
commit rules
Thirdly, the rule of imposing hunting belts states that the upper part of the belt is tightly fixed to the cortex, and the lower part remains free, which increases the likelihood of caterpillars getting under it, intercepting the cortex should be excluded, for this it is necessary to loosen the ties every month.
inspection and destruction of pests
And finally, to increase the effectiveness of this method, inspection of hunting belts is carried out at least once every 10 days, especially during the development of caterpillars of the apple codling moth, with the subsequent destruction of the detected pests and disinfection of the belt.
Materials required for manufacturing
Making a hunting belt with our own hands is within the power of each of us. The main material in this case is corrugated paper or burlap. The main disadvantage of a corrugated paper belt is its one-time use, since the choice of pests from it is associated with certain difficulties. For repeated use, belts made from old blankets or any other fleecy fabric folded in two layers are ideal.
Manufacturing technique
The technique of manufacturing a hunting belt is not difficult.
To do this, it is enough to cut a strip, the width of which is not more than 10-20 cm, and the length is two times the girth of the tree trunk. Also, newspaper or any other thick paper can be the best material. Folding it in four to five layers and making a tourniquet, it must be laid around the trunk, covered with a strip of thick paper and secured, like any other hunting belts on fruit trees. Experienced gardeners are advised to choose a belt design that would suit you one hundred percent. For example, for gardeners who love fishing, such a belt will be the one from which it will be most convenient to choose caterpillars that will be a great bait.
Professional Tips
In some areas, the development of the codling moth occurs in two generations. Gardeners whose summer cottages are located in these areas should put on belts in mid-June, check them every week until the belt is removed, which ideally should take place in mid-August.
If you follow the advice of experienced professionals, then the presence of a double set of hunting belts at times increases the effectiveness of this method, since in this case, removing one set of belts, you immediately apply the second one, having previously destroyed the pests that remained at the place of attachment of the belt. If the belt is made of fabric, then processing it is not difficult: it is enough to soak it in hot water with powder, and after a few hours with a brush to clean from dirt and cocoons. After drying in the fresh air, the belt is again clean and ready for use.
Mid-August is no reason to take off your belts. At this time, gardeners are advised to leave them on the trees until late autumn, until they have mites. But there is a certain nuance: for collecting ticks, corrugated paper belts will be most convenient, which are superimposed not only on the trunk, but also on all skeletal branches. At the end of the season, such belts are removed and buried in a compost pit.
Ecotrap's hunting belt is a very effective tool.
Ecotrap hunting belts are an effective tool in controlling insects. They are glue that does not contain toxic substances, which is applied in the form of hunting belts on tree trunks. Glue is applied in the spring months, shortly before the migration of insects from the soil to the crown of trees. During a massive relocation, pests adhere to the belt, which guarantees protection for your future crop.
