How to make a gate in the country with your own hands
The gate at the site at all times performed an important practical task. But wouldn’t it be bad if, in addition to its functional purpose, this important element of the garden plot will be distinguished by originality, pleasant appearance or some little things that can distinguish this summer cottage attribute against the background of an unremarkable fence or, conversely, give an attractive touch an additional touch. On how to make a beautiful gate, how to choose the right option from the mass of existing will be discussed later.
Content
- Determining the installation location of the gate
- Varieties of gates
- Wicket gate video
- Wooden gate
- Metal gate video
- Wicket door
- Gate locks
Determining the installation location of the gate
When choosing a place for installation in the wicket fence, you need to be guided by simple principles to ensure a convenient passage to the site buildings, and also there should be no pits and depressions near the future wicket so that water does not accumulate, otherwise the dirt in the house is provided.
Several gates are quite acceptable on the site, for example, two - in the front part (front) and in the rear (back entrance for household needs or to reduce distances. The types of gates are varied, but they should fit perfectly into the design of the fence, so you need to think carefully what material and how to make the gate so that it is better combined with the fence itself and with the gate.
Varieties of gates
From the most commonly installed wickets, you can choose several popular types, different in design, structure and materials for manufacturing.
A gate made of wooden slats creating a specific pattern with carved wooden posts is suitable for an internal fence on a site (for example, a garden).
A solid wooden gate fits well into an old stone or brick fence.
An elegant metal gate made of forged elements is usually installed in a fence with the same pattern. A wicket from a profiled sheet is most suitable for installation in gates of a similar design.
Wicket gate
Even if there is no car yet, it is necessary to plan its appearance. Therefore, the entrance gate in the country is needed. If the layout of the site is such that the entrance is located next to the house, it is quite reasonable to study the question of how to make a gate at the gate and save money, because it is clear that a gate with a built-in gate will require less wood or metal.
It is not necessary to fantasize strongly here, the gate should be a single unit with the gate and be made of similar materials.
If you place the gate and gate in different places, the same style of fence must still be maintained. A wooden gate corresponds to a wooden gate.
Wooden gate
The most affordable material for the manufacture of gates is wood. Clarifications on how to make a gate out of wood are practically not required, a person who knows how to hold a hammer and a hacksaw in his hands is quite capable of making this at least the simplest element of the fence. You need only a few boards, preferably planed, or shtaketin. Putting them together in a certain order, fastening the hinges and the handle, painting is not difficult.
By decorating, you can turn an ordinary gate into something special.
More complex manufacturing options for wooden gates require special tools and certain skills. The use of protective compounds for the protection of wood is mandatory.
Metal gate
A much greater variety of metal gates differ. Bent sheets, rods, corners, squares, pipes can be combined in various versions, giving the finished product a unique look. The classic version of the metal gate is a welded frame from a corner or pipe with cross-welded reinforcement inside or a netting net.
Simple, reliable, but not aesthetically pleasing. To create a beautiful metal gate using wrought iron. In the video presented, understandable and literally step-by-step instructions on how to make a metal gate with forged elements with your own hands.
Wicket door
With the advent of corrugated board, the process of manufacturing a gate was so simplified that even a schoolboy can build it. Before you make a wicket from a profiled sheet, you need to choose it correctly. The sheet should not be too thin, and if it is already painted, then the color is not too bright. Sheets are mounted on a prefabricated frame. It is better to screw the corrugated board on both sides of the frame, the design will be more durable and the view on both sides will be noble.
Gate locks
There are many ways to lock the gate, as well as the gates themselves. You can embed an ordinary door lock, hang a padlock in a rustic manner, inside you can make a deadbolt or an ordinary iron hook. It must be remembered that all iron locking devices must be well lubricated before winter.
A good element of protection will be a hidden heck, which is quite simple to manufacture. At the opening of the gate, an inch metal pipe is driven into the ground from the inside, a heck of iron rod is attached to the gate above the pipe, and in a tricky way, a rope is lifted to an inconspicuous place to lift the heck.
